Fiberglass Mesh is a cheap material that does not burn and is characterized by both low weight and high strength. These properties allow it to be successfully used in the formation of plaster facades, as well as use on internal wall and ceiling surfaces. This material is widely used for fastening the surface layer at the corners of the room.
Most widely used standard fiberglass plater mesh is the density of 145g/m2 and 165g/m2 for exterior cladding and facade work. Resistant to alkalis, does not decompose and will not rust over time, it does not emit toxic and harmful substances, has a high resistance to tearing and stretching, protects the surface from cracking and improves its mechanical strength. Easy to handle and use.
Drywall fiberglass not-sticking tape and Fiberglass Self Adhesive Tape are used for combining the joints between walls and windows, door together with our fiberglass mesh to repair the cracks, joints and seams of drywall, plasterboard and other surfaces. Drywall fiberglass not-sticking tape should be used with cellophane tape. Fiberglass self-adhesive tape could be used alone.
Fiberglass Chopped Strands enhance value and mix well with fibrous materials such as wood, paper and polyester. They have been specially developed for use in wet-formed mats and veils, which are processed in either acidic or neutral white water systems. Improved mat properties make these products suitable across a diverse range of end-use applications such as specialty papers, filters, printed circuit boards, roofing mats, roof tiles, acoustic tiles and vinyl-coated flooring.
Fiberglass Yarns consist of a defined number of E-Glass filaments of a certain nominal diameter, brought together to form a yarn. The structure of the yarn is fixed and protected by a size and a slight twist, generally in Z-direction.
Our E-Glass fiberglass yarns are wound on plastic bobbins and supplied in a “milk bottle” shape. Vetrotex glass yarns can be also supplied on beams. The glass composition meets the certification for E-Glass as defined by ASTM’s D578-00 Standard Specification for fiberglass filaments.
Outside corner beads
Whether on a wall or on a soffit, outside corners must be covered with PVC Corner Bead. The material protects the surface and has a slightly raised beaded edge, which keeps the corner straight and acts as a screed while taping.
It wasn’t too long ago that square-edged metal corner bead was the most commonly used corner bead, and it may still be today, but the other options really are worth looking into. Today, you have your choice of metal, vinyl, plastic covered with paper, or metal covered with paper. Some types are available in 100-ft. rolls. Bullnose beads are also available in a variety of sizes and have become very popular because they offer an elegant look and are just as easy to install as regular bead.